Four Bar Rotary Cutting & Creasing Machine
Cutting and Creasing is the initial process carried out in the manufacture of a corrugated box. It is simultaneously carried over this machine. Two pairs of shafts have creasing and cutting heads mounted on them which can be easily set as required. Depending upon the thickness of the board (3 ply, 5 ply, 7 ply, 9 ply), separate creases are to be used. The sheets are piled on the feed table and fed through the machine by hand.
Specifications of Four Bar Rotary Cutting and Creasing Machine
|Size||Motor HP||Weight Aprox. MT||Floor Area|
|65″||2||1.7||7′ x 4′|
|75″||2||2||8′ x 4′|
|85″||2||2.2||9′ x 4′|
|95″||3||2.8||10′ x 4′|